Energy usage diagnosis
USD150
One-time payment
We install the sensor for about a month, analyze each circuit, review the findings with you and deliver a report with recommendations.
For anyone who wants to know why the bill went up.
Home / Smart Meter
Smart Meter
See on your phone how much each circuit in your home or business uses, and get a report that tells you which appliance is using too much.
Diagnosis USD 150
What an installation looks like
A clamp on each circuit inside the panel, and a sensor that sends the data over Wi-Fi. The utility meter is not touched.
A report that tells you which appliance is failing
Every appliance leaves a footprint in the data: how much power it draws, how many times it starts a day and at what hours. With that footprint we go from adding up kilowatts to pointing at the appliance.
“Circuit 3 used 90 kWh.”
“The fridge starts 38 times a day when 15 is normal. Check the door seal or the condenser.”
A real case: a clinic
Air conditioning took almost three quarters of the energy, mostly during office hours. The recommendation was to review A/C scheduling, temperature and maintenance in that window before replacing equipment.
This case shows the method. It doesn't guarantee another business will have the same breakdown or savings.
Commercial clinic
681.9 kWh measured over 34.6 days
- Air conditioning, 502.9 kWh
- 73.75 %
- Everything else
- 26.25 %
Plans and prices
If you want to know why your bill went up, start with the diagnosis. If you want control all the time or your usage is high, permanent monitoring is the better fit.
Permanent smart monitoring
USD350
Regular price USD 425
The equipment stays in your panel: MTG hardware, professional installation, setup and permanent app access.
For continuous control or high usage.
Monthly follow-up
USD11.99
Per month, optional
Every month we send you the analysis of your usage, the tariff tier you're falling into and recommendations, with support.
With permanent equipment you can use the manufacturer's app with no monthly fee.
How it's installed
- Panel assessment
We arrange a short check: panel access, nearby Wi-Fi and whether there are solar panels.
- Installation
Two to three hours, with no long power cuts. We put a clamp on each circuit.
- Live usage
We send you a link to the portal: current usage, history, breakdown by circuit and peak hours.
- Report
With the data and your bills we prepare the findings and recommendations, signed by an engineer.
The equipment we install
We work with Emporia Energy hardware and leave it set up with our platform.
Vue 3 sensor
Goes inside the panel and measures up to 16 circuits plus the main feed. With solar panels, it also shows what you produce and send to the grid.
Smart plug
Measures a single appliance, like an old fridge or a water heater, and tells you how much it uses. Turn it off from your phone or on a schedule.
EV charger
Level 2 charger up to 48 amps when hardwired. It shows the energy used by each charge and is controlled from the app.
Each kWh you save is worth more than it looks
Residential tariffs are charged in tiers. The kWh you stop using comes off the most expensive tier you're paying, not the average.
With ENSA the tier price applies to the whole month's usage: going from 300 to 301 kWh, or 750 to 751, raises the price of every kWh. That's why the report tells you which tier you're falling into.
A real EDEMET bill
Residential tariff, a customer's bill
| Monthly usage | 388 kWh |
| Average price on the bill | B/. 0.1684 per kWh |
| What each kWh cut was worth | B/. 0.22549 per kWh |
Each kWh saved was worth 34% more than the bill's average.
What you need
- Authorized access to the electrical panel.
- 2.4 GHz Wi-Fi near the panel.
- Permission from the owner or building management.
- Let us know about solar panels or other special setups.
What the meter doesn't do
- It doesn't lower the bill by itself: it shows you where to act.
- It can't separate two appliances on the same circuit.
- It doesn't by itself confirm an electrical fault or a utility billing error.
- It doesn't touch the utility meter or its billing.
Frequently asked questions
How much will I save?
It depends on which appliances use energy in your property, which is exactly what we measure. We don't promise percentages: we give you the findings and what each cut is worth on your tariff.
Do you touch the utility meter?
No. The sensor goes inside your internal panel. The utility meter and its billing stay as they are.
When do I see the first data?
You see live usage the same day it's installed. With one or two weeks of data each appliance's pattern shows up, and the diagnosis report is delivered at the end of the month.
Does it work in apartments?
Yes. We measure the apartment's internal panel, not the building's common areas.
What if my panel has more than 16 circuits?
We install a second sensor. Send us a photo of the panel and we'll tell you how many are needed.
What happens when the diagnosis ends?
We review the findings with you and remove the equipment, unless you decide to move to permanent monitoring.
Book your panel assessment
Tell us whether it's a house, apartment or business, and how much you pay for electricity each month.